I have a Windows Vista SP1 computer with Cisco VPN Client 5.0.03.0530. When I use VPN from this computer I can't split tunnel. I knonw it's something with windows Vista, becuase I have the same software running on XP and it works fine. Has anyone run into this issue?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco VPN Client on Vista Split Tunnelling
- Thread starter dannyyo
- Start date
NetworkGhost
IS-IT--Management
On your VPN client do you see the split tunnel routes added?
Right click on the lock, Click on Status and I think its the second tab in the window. You should see the routes there. I may be off a bit on the steps.
Right click on the lock, Click on Status and I think its the second tab in the window. You should see the routes there. I may be off a bit on the steps.
- Thread starter
- #3
NetworkGhost
IS-IT--Management
Where did you find this out? Was just curious if you got this from Cisco or not.
- Status
Similar threads
- Locked
- Question
- Locked
- Question