Cisco VPN Client could not find the adapters GUID

[henrikh]

I have Cisco's VPN client 4.0.2 (B) installed on a Win2k configured for IPSEC over UDP. I am unable to establish connection. Any ideas? I get the following log after I have entered login id and pwd:

Cisco Systems VPN Client Version 4.0.2 (B)
Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.0.2195

1 15:23:56.026 02/14/05 Sev=Warning/2 CVPND/0xE3400015
The VPN Client could not find the adapters GUID.

2 15:23:56.026 02/14/05 Sev=Warning/3 CVPND/0xE340000E
The Client was unable to enable the Virtual Adapter because it could not set the IP configuration into the registry.

3 15:23:56.026 02/14/05 Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable

4 15:23:56.026 02/14/05 Sev=Warning/2 IKE/0xE3000099
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:938)

5 15:23:56.026 02/14/05 Sev=Warning/2 IKE/0xE30000A5
Unexpected SW error occurred while processing Quick Mode negotiatorNavigator:2086)

 

[themut]

I would reinstalled the VPN software again. Make sure you use the VPN client installer to remove it and don't use the Add/Remove Rrograms feature from the Control Panel, otherwise you will not be able to reinstall the VPN Client software again.