Hi all,
I have an issue where we are trying to connect throuhg a CISCO 800x Series adls router to a customer that has a pix using the cisco vpn client.
I have removed access lists from our router and tested the connection.
The cisco vpn client is sending but not receiving anything back.
Now our router is used for other conenctions to pix and cisco routers via the vpn client and works fine.
We can also take the laptop with the cisco client to another broadband connection and it works fine connecting to the pix.
We rebooted the pix and were able to connect to the pix ,
we shutdown the connection and re tried and again we are not able to connect.
I turned debugging on on our adsl router that the cisco vpn client goes through and the only error is about the unexpected SA.
I know its vague but what Should I be looking at in regards to the PIX, I believe it relates to the SA.
But I dont pend a ot of time pn Pix's so woud love some guidnace on how best to pin it down.
Cheers
Steve
I have an issue where we are trying to connect throuhg a CISCO 800x Series adls router to a customer that has a pix using the cisco vpn client.
I have removed access lists from our router and tested the connection.
The cisco vpn client is sending but not receiving anything back.
Now our router is used for other conenctions to pix and cisco routers via the vpn client and works fine.
We can also take the laptop with the cisco client to another broadband connection and it works fine connecting to the pix.
We rebooted the pix and were able to connect to the pix ,
we shutdown the connection and re tried and again we are not able to connect.
I turned debugging on on our adsl router that the cisco vpn client goes through and the only error is about the unexpected SA.
I know its vague but what Should I be looking at in regards to the PIX, I believe it relates to the SA.
But I dont pend a ot of time pn Pix's so woud love some guidnace on how best to pin it down.
Cheers
Steve