Cisco VPN Client 4.0 to Linksys RV082

[Mako2U]

Anyone have a sample configuration for a Cisco VPN Client 4.0 to Linksys RV082 router or know where I can find one? The remote clients have dynamic ip addresses and the RV082 has a static ip.

I need to put this up quickly and don't have enough time to reasearch. Thanks!

Mako

 

[lgarner]

Do you know if this configuration even works? It might, but as far as I know the Cisco client is designed to connect to only Cisco products (Pix & VPN Concentrator).

 

[Mako2U]

I called Linksys TechSupport before I bought the RV082 and asked which VPN clients would work. They suggested SSH Sentinel and Cisco VPN Client 4.0.

 

[mauricewt]

I am in the same situation, what did you finally decided upon for a solution?

Thanks in advance

Maurice

 

[abuthemagician]

let me know as well

 

[mauricewt]

I gave up with this and used SSH Sentinel 1.4

Got this working over dialup but seems very temperamental. Connection very slow etc..

Think you can still get a freeby version of 1.3 but i downloaded the evaluation copy of 1.4 as its been sold off now. Found it on the net for £55 so thats not to bad considering all the functionality in the software.

Going to test from a broadband connection next, hopefully it should run very smoothly.

 

[bcastner]

. vpn under dial-up is slow. It is slow under broadband
. You might consider upgrading your CISCO VPN client software. 4.0 is way out of date
. SSH Sentinal is free for personal and academic users:

http://www.olin.wustl.edu/computing/reference/wireless/ipsec.cfm

. Check that your Linksys router firmware is up-to-date on the Linksys site.

 

[mauricewt]

I have tried to get an evaluation copy of the Cisco VPN Client software but cant seem to even from the cisco site ??

 

[mauricewt]

I bought a copy of cisco vpn client and i am now pretty certain this cannot be configured to work with the rv082. ssh sentinel seems to be a far better piece of software.