I am using a Cisco VPN 3002 Hardware Client connecting to a VPN 3000 Concentrator, I have configure a new group and a new user on the concentrator, I have confiured the hardware client and have successfully logged into the concentrator but there is no traffic between the two the tunnel is established, I don't see any error messages in the logs on the hardware so I'm not sure what's going on, I am not able to ping the internal interface of the concentrator from the hardware client. Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco VPN 3002 to VPN 3000 Help
- Thread starter ruhkus
- Start date
Similar threads
- Locked
- Question