Cisco VG248 to Octel 250 VM

[BobW96]

I need to interface a VG248 to an Octel 250 using SMDI so Cisco CallManager can use the Octel 250. Anyone done this? Big thing is the cabling between the devices. Appreciate any support.

Bob

 

[jml2665]

here is a config note, which can easily be found on support.avaya.com

http://support.avaya.com/elmodocs2/Octel/config/cn5405.pdf

 

[KenMeans]

Yes it has been done many times by many companys.

Have yu worked with SMDI before?

If you need help let us know.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[BobW96]

Thanks Ken. Nope, never worked with SMDI before but I'm sure I'll find out when I do the intergration. The document link you provided is good...I found the Rev. F version of this and it was wrong that's why the thread. This Rev. G looks a lot better and makes more sense.

If I run into issues I'll let you know.

 

[KenMeans]

Ok just FYI jml2665 posted the link so i want to make sure he gets the thanks for that.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[BobW96]

Sorry jml2665...great appreciate the help.

Bob