Cisco univercd mistake?

[helpdeskdan]

http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1918.htm

"1. When connecting Cisco devices with non-Cisco devices, you must use IETF4 encapsulation on both devices. Check the encapsulation type on the Cisco device with the show frame-relay map exec command."

frame-relay map?!! I am 90% sure that should mean "show interface serial." I need to be 100% sure - your comments are appreciated.
-Dan

 

[helpdeskdan]

Solved my own question. I'll be durned'

http://www.cisco.com/en/US/products...erence_chapter09186a0080087e14.html#wp1022344