HI here is the problem :
A fail software upgrade of the NM-CUE module make impossible the restore the disk using the boot loader. here is my input when i boot the module ;
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
Please enter '***' to change boot configuration: Found disk 0
found 1 drives
root cmd : root (hd0,0)
Filesystem type is reiserfs, partition type 0x83
kf: a1 : /bzImage root=/dev/hda1 ro plat=nm
kf: a2 : /bzImage root=/dev/hda1 ro plat=nm
in grub_open: /bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
in grub_open4: /bzImage root=/dev/hda1 ro plat=nm
kernel_func: kt: 0
Unable to load image
in boot func: kt: 0
Unable to boot imageø
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
Please enter '***' to change boot configuration: ***
ServicesEngine Bootloader Version : 2.1.14
ServicesEngine boot-loader> config
IP Address [192.168.1.250] >
Subnet mask [255.255.255.0] >
TFTP server [192.168.2.59] >172.16.2.59
Gateway [172.16.1.1] >
Default Helper-file [cue-installer.nm-aim.3.2.2] >
Ethernet interface [internal] >
Default Boot [none|disk] [disk] >
Default bootloader [primary|secondary] [primary] >
Updating flash with bootloader configuration
ServicesEngine boot-loader> boot loader
Invalid boot option
Usage: boot <disk | helper | diag | compactflash | chainloader>
ServicesEngine boot-loader> boot helper
nw_boot: 0 cue-installer.nm-aim.3.2.2
Me: 192.168.1.250, Server: 172.16.2.59, Gateway: 172.16.1.1
Loading cue-installer.nm-aim.3.2.2
Dbg: Final image size: 11335004
nm_get_bl_type: 0
nm_load_cisco_chain_load: 0
Debug: bl_sz: 94016
Debug: cisco_bl_sz: 58641
cisco_cl_addr: 0x1001730
nm_get_bl_type: 0
nm_load_cisco_chain_load: 0
Debug: bl_sz: 94016
Debug: cisco_bl_sz: 58641
Debug: loader_sz: 4000
loader_addr: 0x1200000
Cisco BootLoader start
verify_netboot_img
found signature
Found bootable
img_start: b sig_len: 172 sig_start: l
nm_get_bl_type: 0
bl_sz: 94016
Cisco_bl_sz: 58641
after buf_len: 4000
after KEY_InitMem
reading key: 0
reading key: 1
reading key: 2
reading key: 3
reading key: 4
reading key: 5
after aesop_RSA_keyarray_read
in verifysignature_md5, MD5 hash generated now, str format:hexmd5:715b5ff8414ab2b0b64780f287f9eef9
Verifying signature now...
calling RSA decrypt now
mem ptr: 0 704 832 968 1040 1172 1184 1196 1208 1220 1228 1244 1268 1284 1300 1316 1332 1344 1360 1384 1400 1664 1804 2080 2224 2364 2880 3396 3660 3924 4188 RSA decrypt returned:33
verifysignature_md5, Orig MD5 hash generated during encryption:715b5ff8414ab2b0b64780f287f9eef9
signatures match...
Image signature verified successfully
CISCO_BL: boot_image: 0x1200000
[LOADER]: image/plat/sz: 2/1/11335004
Aesop Helper: system image header: v=2, b=946332, i=10386247
Network boot: moving 3072 code bytes to 0x90000
....
Network boot: invoking kernel now
[BOOT-PHASE2]: booting kernel
[BOOT-PHASE2]: booting kernel
Linux version 2.4.24 (bld_adm@bld-system) (gcc version 2.95.3 20010315 (release)) #1 Fri Mar 30 08:37:07 PST 2007
Platform: nm
setup.c: handling flash window at [15MB..16MB]
setup.c: handling kernel log buf at [250.5MB]
setup.c: handling trace buf at [251MB]
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
BIOS-e820: 0000000001000000 - 000000000fa80000 (usable)
BIOS-e820: 000000000fa80000 - 000000000fb00000 (reserved)
BIOS-e820: 000000000fb00000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
250MB LOWMEM available.
On node 0 totalpages: 64128
zone(0): 4096 pages.
zone(1): 60032 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: root=/dev/ram ramdisk_size=200000 ramdisk_start=0x6000000 console=ttyS0,9600n8 plat=nm
Initializing CPU#0
Detected 498.674 MHz processor.
Calibrating delay loop... 996.14 BogoMIPS
Memory: 239964k/256512k available (1211k kernel code, 15136k reserved, 693k data, 96k init, 0k highmem)
kdb version 4.3 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
in atrace_init
log_head: h: -411752079, t: -1116901818, l: -39864027, w: 24708, s: -564133928
Initializing trace buffer
log_head: h: -1426063360, t: 0, l: -318767104, w: 0, s: -1404044352
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeab9c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Cisco ContentEngine Flash Driver Version 0.02
RAMDISK driver initialized: 16 RAM disks of 200000K size 1024 blocksize
eepro100.c:v1.09j-t 9/29/99 Donald Becker eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: PCI device 8086:1229, 00:1A:E2:ED:16:E5, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
eth1: PCI device 8086:1229, 00:1A:E2:ED:16:E6, IRQ 10.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda
io, hdbio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcio, hddio
hda: C/H/S=50127/232/176 from BIOS ignored
hdb: C/H/S=0/0/0 from BIOS ignored
hda: Hitachi HTE541680J9AT00, ATA DISK drive
blk: queue c03210c0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/7512KiB Cache, CHS=9729/255/63, UDMA(33)
init unit number == 0
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
Model == Hitachi HTE541680J9AT00
Flash capacity == 156301488
init unit number == 1
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 100663296
Freeing initrd memory: 10142k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Init drive control
Freeing unused kernel memory: 96k freed
Unable to handle kernel paging request at virtual address 6d28f198
printing eip:
c0123757
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0123757>] Not tainted
EFLAGS: 00010206
EIP is at __find_lock_page_helper+0x23/0x6c [kernel]
eax: c13c1d44 ebx: 6d28f190 ecx: 6d28f190 edx: 00000c37
esi: 00000c37 edi: c13c1d44 ebp: c12bdd3c esp: c12bdd2c
ds: 0018 es: 0018 ss: 0018
Process init (pid: 1, stackpage=c12bd000)
Stack: 00000000 c699eb00 c13c1d44 6d28f190 c12bdd54 c01237fc 00000000 c699eb00
000061be cfa10f5c c12bdd8c c01b77a0 c13c1d44 00000c37 000001d0 00000000
c699eb00 000061be 00000400 00000000 00000000 00000c00 00000c37 c13c1d44
Call Trace:
[<c01237fc>] find_or_create_page+0x44/0xfc [kernel]
[<c01b77a0>] rd_blkdev_pagecache_IO+0xb8/0x1d0 [kernel]
[<c01b78f8>] rd_make_request+0x40/0x84 [kernel]
[<c01b61df>] generic_make_request+0x123/0x138 [kernel]
[<c01b624c>] submit_bh+0x58/0xdc [kernel]
[<c013273e>] block_read_full_page+0x22e/0x24c [kernel]
[<c01232c1>] add_to_page_cache_unique+0x95/0xa0 [kernel]
[<c0159755>] ext2_readpage+0x11/0x18 [kernel]
[<c01593bc>] ext2_get_block+0x0/0x370 [kernel]
[<c0123374>] page_cache_read+0xa8/0xc0 [kernel]
[<c01233ba>] read_cluster_nonblocking+0x2e/0x48 [kernel]
[<c0124a1d>] filemap_nopage+0x109/0x20c [kernel]
[<c0121088>] do_no_page+0x48/0x1c0 [kernel]
[<c0121250>] handle_mm_fault+0x50/0xb4 [kernel]
[<c0110309>] do_page_fault+0x185/0x4b2 [kernel]
[<c0110184>] do_page_fault+0x0/0x4b2 [kernel]
[<c010d596>] old_mmap+0xea/0x124 [kernel]
[<c0108c24>] error_code+0x34/0x40 [kernel]
Code: 39 7b 08 75 f4 39 73 0c 75 ef 85 db 74 32 ff 43 14 31 c0 0f
<0>Rebooting in 2 seconds...
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
Please enter '***' to change boot configuration:
Any tips to help me to resolve this ? If anyone can make me a clone disk with clonezilla will be appr. Or if you see another way to solve the problem ?
Note: Module is out of warantY
A fail software upgrade of the NM-CUE module make impossible the restore the disk using the boot loader. here is my input when i boot the module ;
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
Please enter '***' to change boot configuration: Found disk 0
found 1 drives
root cmd : root (hd0,0)
Filesystem type is reiserfs, partition type 0x83
kf: a1 : /bzImage root=/dev/hda1 ro plat=nm
kf: a2 : /bzImage root=/dev/hda1 ro plat=nm
in grub_open: /bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
in grub_open4: /bzImage root=/dev/hda1 ro plat=nm
kernel_func: kt: 0
Unable to load image
in boot func: kt: 0
Unable to boot imageø
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
Please enter '***' to change boot configuration: ***
ServicesEngine Bootloader Version : 2.1.14
ServicesEngine boot-loader> config
IP Address [192.168.1.250] >
Subnet mask [255.255.255.0] >
TFTP server [192.168.2.59] >172.16.2.59
Gateway [172.16.1.1] >
Default Helper-file [cue-installer.nm-aim.3.2.2] >
Ethernet interface [internal] >
Default Boot [none|disk] [disk] >
Default bootloader [primary|secondary] [primary] >
Updating flash with bootloader configuration
ServicesEngine boot-loader> boot loader
Invalid boot option
Usage: boot <disk | helper | diag | compactflash | chainloader>
ServicesEngine boot-loader> boot helper
nw_boot: 0 cue-installer.nm-aim.3.2.2
Me: 192.168.1.250, Server: 172.16.2.59, Gateway: 172.16.1.1
Loading cue-installer.nm-aim.3.2.2
Dbg: Final image size: 11335004
nm_get_bl_type: 0
nm_load_cisco_chain_load: 0
Debug: bl_sz: 94016
Debug: cisco_bl_sz: 58641
cisco_cl_addr: 0x1001730
nm_get_bl_type: 0
nm_load_cisco_chain_load: 0
Debug: bl_sz: 94016
Debug: cisco_bl_sz: 58641
Debug: loader_sz: 4000
loader_addr: 0x1200000
Cisco BootLoader start
verify_netboot_img
found signature
Found bootable
img_start: b sig_len: 172 sig_start: l
nm_get_bl_type: 0
bl_sz: 94016
Cisco_bl_sz: 58641
after buf_len: 4000
after KEY_InitMem
reading key: 0
reading key: 1
reading key: 2
reading key: 3
reading key: 4
reading key: 5
after aesop_RSA_keyarray_read
in verifysignature_md5, MD5 hash generated now, str format:hexmd5:715b5ff8414ab2b0b64780f287f9eef9
Verifying signature now...
calling RSA decrypt now
mem ptr: 0 704 832 968 1040 1172 1184 1196 1208 1220 1228 1244 1268 1284 1300 1316 1332 1344 1360 1384 1400 1664 1804 2080 2224 2364 2880 3396 3660 3924 4188 RSA decrypt returned:33
verifysignature_md5, Orig MD5 hash generated during encryption:715b5ff8414ab2b0b64780f287f9eef9
signatures match...
Image signature verified successfully
CISCO_BL: boot_image: 0x1200000
[LOADER]: image/plat/sz: 2/1/11335004
Aesop Helper: system image header: v=2, b=946332, i=10386247
Network boot: moving 3072 code bytes to 0x90000
....
Network boot: invoking kernel now
[BOOT-PHASE2]: booting kernel
[BOOT-PHASE2]: booting kernel
Linux version 2.4.24 (bld_adm@bld-system) (gcc version 2.95.3 20010315 (release)) #1 Fri Mar 30 08:37:07 PST 2007
Platform: nm
setup.c: handling flash window at [15MB..16MB]
setup.c: handling kernel log buf at [250.5MB]
setup.c: handling trace buf at [251MB]
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
BIOS-e820: 0000000001000000 - 000000000fa80000 (usable)
BIOS-e820: 000000000fa80000 - 000000000fb00000 (reserved)
BIOS-e820: 000000000fb00000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
250MB LOWMEM available.
On node 0 totalpages: 64128
zone(0): 4096 pages.
zone(1): 60032 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: root=/dev/ram ramdisk_size=200000 ramdisk_start=0x6000000 console=ttyS0,9600n8 plat=nm
Initializing CPU#0
Detected 498.674 MHz processor.
Calibrating delay loop... 996.14 BogoMIPS
Memory: 239964k/256512k available (1211k kernel code, 15136k reserved, 693k data, 96k init, 0k highmem)
kdb version 4.3 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
in atrace_init
log_head: h: -411752079, t: -1116901818, l: -39864027, w: 24708, s: -564133928
Initializing trace buffer
log_head: h: -1426063360, t: 0, l: -318767104, w: 0, s: -1404044352
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeab9c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Cisco ContentEngine Flash Driver Version 0.02
RAMDISK driver initialized: 16 RAM disks of 200000K size 1024 blocksize
eepro100.c:v1.09j-t 9/29/99 Donald Becker eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: PCI device 8086:1229, 00:1A:E2:ED:16:E5, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
eth1: PCI device 8086:1229, 00:1A:E2:ED:16:E6, IRQ 10.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda
io, hdbioide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc
io, hddiohda: C/H/S=50127/232/176 from BIOS ignored
hdb: C/H/S=0/0/0 from BIOS ignored
hda: Hitachi HTE541680J9AT00, ATA DISK drive
blk: queue c03210c0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/7512KiB Cache, CHS=9729/255/63, UDMA(33)
init unit number == 0
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
Model == Hitachi HTE541680J9AT00
Flash capacity == 156301488
init unit number == 1
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 100663296
Freeing initrd memory: 10142k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Init drive control
Freeing unused kernel memory: 96k freed
Unable to handle kernel paging request at virtual address 6d28f198
printing eip:
c0123757
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0123757>] Not tainted
EFLAGS: 00010206
EIP is at __find_lock_page_helper+0x23/0x6c [kernel]
eax: c13c1d44 ebx: 6d28f190 ecx: 6d28f190 edx: 00000c37
esi: 00000c37 edi: c13c1d44 ebp: c12bdd3c esp: c12bdd2c
ds: 0018 es: 0018 ss: 0018
Process init (pid: 1, stackpage=c12bd000)
Stack: 00000000 c699eb00 c13c1d44 6d28f190 c12bdd54 c01237fc 00000000 c699eb00
000061be cfa10f5c c12bdd8c c01b77a0 c13c1d44 00000c37 000001d0 00000000
c699eb00 000061be 00000400 00000000 00000000 00000c00 00000c37 c13c1d44
Call Trace:
[<c01237fc>] find_or_create_page+0x44/0xfc [kernel]
[<c01b77a0>] rd_blkdev_pagecache_IO+0xb8/0x1d0 [kernel]
[<c01b78f8>] rd_make_request+0x40/0x84 [kernel]
[<c01b61df>] generic_make_request+0x123/0x138 [kernel]
[<c01b624c>] submit_bh+0x58/0xdc [kernel]
[<c013273e>] block_read_full_page+0x22e/0x24c [kernel]
[<c01232c1>] add_to_page_cache_unique+0x95/0xa0 [kernel]
[<c0159755>] ext2_readpage+0x11/0x18 [kernel]
[<c01593bc>] ext2_get_block+0x0/0x370 [kernel]
[<c0123374>] page_cache_read+0xa8/0xc0 [kernel]
[<c01233ba>] read_cluster_nonblocking+0x2e/0x48 [kernel]
[<c0124a1d>] filemap_nopage+0x109/0x20c [kernel]
[<c0121088>] do_no_page+0x48/0x1c0 [kernel]
[<c0121250>] handle_mm_fault+0x50/0xb4 [kernel]
[<c0110309>] do_page_fault+0x185/0x4b2 [kernel]
[<c0110184>] do_page_fault+0x0/0x4b2 [kernel]
[<c010d596>] old_mmap+0xea/0x124 [kernel]
[<c0108c24>] error_code+0x34/0x40 [kernel]
Code: 39 7b 08 75 f4 39 73 0c 75 ef 85 db 74 32 ff 43 14 31 c0 0f
<0>Rebooting in 2 seconds...
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
Please enter '***' to change boot configuration:
Any tips to help me to resolve this ? If anyone can make me a clone disk with clonezilla will be appr. Or if you see another way to solve the problem ?
Note: Module is out of warantY