Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco to Nortel BCM

Status
Not open for further replies.
phoneguy2286

phoneguy2286

Vendor
Sep 20, 2002
136
US
I have a site that we are putting in a Nortel BCM with IP trunks. It is outside of the local calling area, so has "metro" lines now, I would have access to a Cisco Call manager in the corportate office that I could trunk off of. Has anyone had any experience trunking the two together? could you give me some direction?

Is seems to me that you would use H.323 trunks, and just pulse out, and look for digits.. A virtual tie line, if you will.

Could someone verify that for me?.. anyone experienced in such a set up?
 
Status
Not open for further replies.

Similar threads

mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
416
mikedphones
mikedphones
Russell35674
  • Locked
  • Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
427
whykap
whykap
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
456
thepfy
thepfy
DTGMI
  • Locked
  • Question
Cisco ATA-191-K9 vs 3PW Mod
Replies
1
Views
470
gnrslash4life
gnrslash4life
DTGMI
  • Locked
  • Question
Nortel to Cisco VG310 & 4431 SIP GWs
Replies
0
Views
149
DTGMI
DTGMI

Part and Inventory Search

Sponsor

Back
Top