has znyone played with connecting Mitel 5330/5340 phones to A Cisco Call Manager. We can get the phone to ring put a call on hold and transfer a call but that is all we can get to work. We would like to be able to have the functionality of all the buttons for speed calls and such.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CIsco to Mitel 5330 using SIP
- Thread starter dclynch
- Start date
I assume you are looking to add speed dials from the cisco web management interface?
Since these are third party SIP phones you are already getting the functionality that you are supposed to. Unless you can program each phone individually with speed dials needed (on the phone itself or via direct web access perhaps), you will not get that from the cisco side.
The phones are working as designed under the sip protocol now.
Since these are third party SIP phones you are already getting the functionality that you are supposed to. Unless you can program each phone individually with speed dials needed (on the phone itself or via direct web access perhaps), you will not get that from the cisco side.
The phones are working as designed under the sip protocol now.
- Status
Similar threads
- Locked
- Question
- Locked
- Question