Cisco Switch-to-switch encrption

[RobDuro]

Hi, I have the following situation.

Users --- CISCO Switch > Trunk Port < Cisco Switch ---- Users

The users are all in the same subnet. The current switches in place are 3750G running IPBASE IOS. Is it possible on the Cisco switches to do encryption between the two switches? If so, how?

Cheers

Rob

 

[baddos]

If configured as a trunk, the frames will be encapsulated but not encrypted. If you need to encrypt the traffic, you can look into using an IPSEC vpn between the two hosts.

 

[VinceWhirlwind]

I'd be interested in specifically how you would do this with a 3750 - setup tunnel interfaces at each end, ....?