cisco switch 2960g 24 port 10/100/1000

[samco1105]

pls i ears the flash for this switch and when he start get me the follwing information
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 32513024
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin"...fl
ash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin: no such file or
directory
Error loading "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin
"
Interrupt within 5 seconds to abort boot process.
Boot process failed...

The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
switch:
switch: ?
Unknown cmd: ?
switch:
switch:

 

[cisconooblet]

http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

link has xmodem recovery steps at the bottom.