Novelluser
Technical User
I setup systems for small/medium clients and I standardise on the PIX515E firewalls & MS SBS 2003 for uniformity. I used to have someone configure the firewalls for me but he is often too busy now and I hate to bug him. I can do some of the simple configuration parts but I need assistance on the trickier parts.
The common requirements are;
1. PIX does the pppoe negotiation
2. Single Public IP Address used
3. Allow smtp traffic to server (Exchange)
4. Allow http & https traffic to server on the inside (Exch Web outlook)
5. Cisco VPN Access via Cisco VPN Client
I would prefer to learn this using the cli commands instead of using the PDM.
I would really appreciate you guys help on this.
Thanks
The common requirements are;
1. PIX does the pppoe negotiation
2. Single Public IP Address used
3. Allow smtp traffic to server (Exchange)
4. Allow http & https traffic to server on the inside (Exch Web outlook)
5. Cisco VPN Access via Cisco VPN Client
I would prefer to learn this using the cli commands instead of using the PDM.
I would really appreciate you guys help on this.
Thanks