Hi all !
I am a newbie on cisco but i have some knowledge in networking and firewalls.
Here is my question.
I am a networkadmin on a small company wich is a member of a enterprise.
We recently bought some wireless accesspoints and we must stop all traffic from being routed to the wan of the enterprise.
I am going to solv this with a Cisco pix 506e with the latest software that have vlan capabilitys.
All traffic that is going from the wireless network (Vlan2) can only go to our servers and the rest of our network (Vlan1) can go anywhere.
We have our own klass c network with public addresses and now i must in some way split it in three parts becasuse of the vlans and the little network between our router and the firewall.
The problem is that i don't want to split it in three equal parts because we have to many nodes in the vlan1.
And i must use public adresses in every network.
The most attractive distribution should be:
2 nodes in the network between the router and the firewall.
180 nodes in vlan1
70 nodes in vlan2
How should i do ?
Can this be done ?
I am a newbie on cisco but i have some knowledge in networking and firewalls.
Here is my question.
I am a networkadmin on a small company wich is a member of a enterprise.
We recently bought some wireless accesspoints and we must stop all traffic from being routed to the wan of the enterprise.
I am going to solv this with a Cisco pix 506e with the latest software that have vlan capabilitys.
All traffic that is going from the wireless network (Vlan2) can only go to our servers and the rest of our network (Vlan1) can go anywhere.
We have our own klass c network with public addresses and now i must in some way split it in three parts becasuse of the vlans and the little network between our router and the firewall.
The problem is that i don't want to split it in three equal parts because we have to many nodes in the vlan1.
And i must use public adresses in every network.
The most attractive distribution should be:
2 nodes in the network between the router and the firewall.
180 nodes in vlan1
70 nodes in vlan2
How should i do ?
Can this be done ?