schroednic
IS-IT--Management
Hi all;
I am trying to get my 506 to sync with my newly installed broadband/cable circuit.
Trying not to use a router, thinking I only need a couple of route statements to get to the public side.
It's a real simple config file, so it should work? Here's the outside statements I have.
outside 0.0.0.0 0.0.0.0 <public ip gateway>
outside <public ip subnet> 255.255.255.240 <first usable CIDR IP>
Please let me know if those statements are correct, or if a router actually is necessary. Thanks.
I am trying to get my 506 to sync with my newly installed broadband/cable circuit.
Trying not to use a router, thinking I only need a couple of route statements to get to the public side.
It's a real simple config file, so it should work? Here's the outside statements I have.
outside 0.0.0.0 0.0.0.0 <public ip gateway>
outside <public ip subnet> 255.255.255.240 <first usable CIDR IP>
Please let me know if those statements are correct, or if a router actually is necessary. Thanks.
