Cisco PIX 501e to 1711 Multi VPN and VPN client

[Hunterslb]

I have setup multiple IPSEC tunnels between the PIX and 1711 router successfully, and am now trying to access the multiple LAN segments using the CISCO CPN client through the PIX. I can successfully make the client connection and can ping the network directly connected to the PIX's internal interface, and from a device on that network can ping the VPN client, but can not ping (or anything else) on any of the networks running through other IPSEC tunnels.
The VPN client IP address range is different than any of the other networks. The ACL's state that the VPN client IP address reange is allowed access to the other networks, but something is missing.

Any ideas would be greatly appreciated.

Thank you in advance

 

[lgarner]

The Pix won't send traffic out on the same interface on which it arrives. You need another way in, either another VPN device or a third interface on the Pix. The 501 and 506e only support 2 interfaces, so that won't work here.