Cisco PIX 501 config problem

[bachma0507]

I manage an existing PIX 501 firewall which was not originally setup by me. It works fine. We have an additional DSL connection which I need to setup another PIX 501 for. I configured the DSL router with the LAN IP gateway (70.zzz.xx.153 255.255.255.248), connected to it with a laptop and was able to get to the internet. I then proceeded to setup the PIX with inside 172.26.0.252 255.255.0.0, and outside (PAT)70.zzz.xx.158 255.255.255.248 and route outside 70.zzz.xx.153. I think I have everything setup correctly, but I cannot ping anything on the outside from the PIX, and I cannot get to the outside when I connect a laptop to it (static IP 172.26.0.200 255.255.0.0 gateway 172.26.0.252). Here is the configuration:

Building configuration...
: Saved
:
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password tdkuTUSh53d2MT6B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname attdslpix2
domain-name mycompany.com
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list inside_outbound_nat0_acl permit ip any 172.26.5.192 255.255.255.248
access-list outside_cryptomap_dyn_20 remark implicit rule
access-list outside_cryptomap_dyn_20 permit ip any any
access-list inside_access_in remark MYC
access-list inside_access_in permit ip 172.26.0.0 255.255.0.0 any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 70.zzz.xx.158 255.255.255.248
ip address inside 172.26.0.252 255.255.0.0
ip verify reverse-path interface outside
ip audit info action alarm
ip audit attack action alarm
ip local pool pptp-client-ip 172.26.5.195-172.26.5.199
pdm location 172.26.5.192 255.255.255.248 outside
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 70.zzz.xx.153 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 172.26.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-pptp
sysopt connection permit-l2tp
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP client configuration address local pptp-client-ip
vpdn group PPTP-VPDN-GROUP client configuration dns 172.26.0.250 172.26.0.251
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username myname password *********
vpdn enable outside
vpdn enable inside
dhcpd address 172.26.5.100-172.26.5.130 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:c7dfe356e3756d2ac555e18809d0c910
: end
[OK]

Any help is greatly appreciated.

 

[brianinms]

What ip address did you use on the laptop for your initial tests?

 

[bachma0507]

On the laptop when I connected to the DSL router for the DSL connection test I used 70.zzz.xx.155 with mask 255.255.255.248 and gateway 70.zzz.xx.153 (the LAN IP I setup on the DSL router). That connected fine and I was able to access the internet. By the way the IP block we got from the ISP is 70.zzz.xx.152 - 70.zzz.xx.158 with 70.zzz.xx.153 as the LAN IP and with mask 255.255.255.248.

When I connected to the PIX with the laptop, I used 172.26.0.200 255.255.0.0 and gateway 172.26.0.252 (the inside IP on the PIX). The outside IP on the PIX is 70.zzz.xx.158 (PAT). I tried pinging 70.zzz.xx.153 (the route outside IP) from the PIX and got no response.