Our company is looking into purchasing Cisco's Meeting place. Our switch is 81c 1000m 3.0 with a signalling server. With the following specs from Cisco, what would they need from me to make the voice portion of this work. Thanks in advance.
Specifications
• Capacity: Up to 576 T1 channel associated signaling (CAS) ports within a single system where additional systems can be
linked through Cisco MeetingPlace Web Conferencing. Up to 480 E1 Primary Rate Interface (PRI) ports, 368 T1 PRI
ports, or 480 IP ports within a single system
• Redundancy: Dual disk drives, and hot-swappable, redundant power supplies and fans
• Connectivity: Connects to private branch exchange (PBX), public switched telephone network (PSTN), or IP telephony
systems with support for T1 CAS, T1/E1 PRI digital configurations and communication through TCP/IP with H.323 or
Session Initiation Protocol (SIP).
Specifications
• Capacity: Up to 576 T1 channel associated signaling (CAS) ports within a single system where additional systems can be
linked through Cisco MeetingPlace Web Conferencing. Up to 480 E1 Primary Rate Interface (PRI) ports, 368 T1 PRI
ports, or 480 IP ports within a single system
• Redundancy: Dual disk drives, and hot-swappable, redundant power supplies and fans
• Connectivity: Connects to private branch exchange (PBX), public switched telephone network (PSTN), or IP telephony
systems with support for T1 CAS, T1/E1 PRI digital configurations and communication through TCP/IP with H.323 or
Session Initiation Protocol (SIP).
