Cisco LAP-1141 Help....

[Volz]

I'm told that these have to have a controller, but they can be made standalone. Does anyone know how to do this? I've got an 1140 and an older one. The older one, when I used a wireless sniffer it didn't detect a broadcast and when I log into the console, lines and line keep rolling by. It's like it's looking for instructions. My guess is that it's looking for the controller. I can get to enable mode, but we do not know the password, so that's another thing. Since there is no reset buttton, how do I reset it so that the password is erased?

Thx for any help
Volz

 

[PScottC]

Download the appropriate IOS from Cisco.

Follow instructions at this link [URL unfurl="true"]http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html[/url]

You'll find Lightweight to Autonomous instructions about half way down.

PSC
[—] CCNP (R&S/Wireless) [•] CCSP [•] MCITP: Enterprise Admin [•] MCSE [—]

Governments and corporations need people like you and me. We are samurai. The keyboard cowboys. And all those other people out there who have no idea what's going on are the cattle. Mooo! --Mr. The Plague, from the movie "Hackers