Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco IP Communicator With Tandberg

Status
Not open for further replies.

angelhdz

Technical User
May 2, 2006
18
MX
Hi!!

I have added a Tandberg 880 to the Call Manager (4.2) as an h323 device and assigned an extension number; also I have configured the regions to speak only g711, but we have the following issue:

When we call from our IP Communicator and the VT Advantage to the Tandberg, the people that are in the videoconference room can´t ear me, if we look at the call status, the Tandberg is not recieving audio Packets. The Tandberg and my laptop are in the same subnet, also the same vlan and the same switch, but they can´t ear me!!!

Does anybody know why this is happening? It is pretty weird.


Regards
 
OK, I have solved this issue, sorry for post too late.

I just uncheck the Media Termination Point Required option at Phone Configuration (Tandberg as H323 device)

Regards.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top