Need to configure Frame Relay traffic Shaping at a hub and several spoke sites with varying PVC parameters. need to understand how the paramaters on one PVC map-class definition will impact on the other subinterfaces on the frame relay access. The Cisco examples only show a single PVC on the Frame access.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco FRTS configuration
- Thread starter nmado
- Start date
firedragon
Technical User
if the parameters are setup on a subinterface, they should not interfer with any other subinterface. only the seting on the interface it self will affect the subinterfaces.
- Status
Similar threads
- Locked
- Question
- Locked
- Question