Hi Folks,
I have a Cisco DT 24+ Gateway registered with CCM 3.3. Outbound calls are no problem... inbound calls are another issue.
When a number is called from the PSTN, I can see the Gateway send a TCP and MGCP NTFY msg to call manager. Call manager responds with a MGCP Response:200 (everything ok msg) - and thats it... no other response... All you here on the PSTN side is a Number Unavailable announcment - even that is inconsistent with some DID responding with a Fast Busy.
The Gateway is set up as a ISDN gateway, PRI NI2 and ESF framing. Is it possible that is the gateway was configure improperly you could make outgoing but not incoming calls?
Mucho Thanks,
Andy
I have a Cisco DT 24+ Gateway registered with CCM 3.3. Outbound calls are no problem... inbound calls are another issue.
When a number is called from the PSTN, I can see the Gateway send a TCP and MGCP NTFY msg to call manager. Call manager responds with a MGCP Response:200 (everything ok msg) - and thats it... no other response... All you here on the PSTN side is a Number Unavailable announcment - even that is inconsistent with some DID responding with a Fast Busy.
The Gateway is set up as a ISDN gateway, PRI NI2 and ESF framing. Is it possible that is the gateway was configure improperly you could make outgoing but not incoming calls?
Mucho Thanks,
Andy