We have a mix of Cisco 1131 and 3502 access points. We also have 4400 and 550 Controllers. It has been recommended that we disable 802.11a and 802.11b to minimize beaconing. Not sure how to do this. Is this something we can turn off with the controllers or do we have to do this on each AP?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco - Disable 802.11a and b
- Thread starter grh959
- Start date
Similar threads
- Locked
- Question