Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CISCO CPA2509 Router
- Thread starter 51774
- Start date
Reboot router, and during the boot up you must hit the ctrl+break keys to break the boot sequence. Then you will be in RMON> mode. Type the following commands:
o/r 0x42
i (for initialize)
Router will boot up and have no configutation on it. Type the following commands else lose your config.
router> en
router# config mem
(You will see a different prompt come back as you have just loaded the startup-config into DRAM)
ROUTER# config t
ROUTER(config)# enable secret (enter password here)
ROUTER(config)# config-register 0x2102
ROUTER(config)# end
ROUTER# wr mem
ROUTER# reload
Your password has now been changed.
"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts
o/r 0x42
i (for initialize)
Router will boot up and have no configutation on it. Type the following commands else lose your config.
router> en
router# config mem
(You will see a different prompt come back as you have just loaded the startup-config into DRAM)
ROUTER# config t
ROUTER(config)# enable secret (enter password here)
ROUTER(config)# config-register 0x2102
ROUTER(config)# end
ROUTER# wr mem
ROUTER# reload
Your password has now been changed.
"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts
- Status
