Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco CME on 2851 max hardware devices supported ?

Status
Not open for further replies.

nemak

Technical User
Jan 3, 2007
8
MK


cisco 2851 /c2800nm-advipservicesk9-mz.124-15.XZ2.bin/
Cisco Unified Communications Manager Express Version 7.0(0)

max-ephones ? <1-110> Maximum phones to support /under telephony-services for Scinny phones/

max-pool ? <1-110> Maximum pools to support /under voice register global for Sip phones/

Q: Is the 110 max number for hardware devices that I can configure whatever combination I ll use for ex:

60 scinny + 50 sip or
110 sip phones
Is it possible to configure more than 110 hw devices?

Thanks
 
it used to be 96 devices. 110 must be the new maximum.
I don't believe you can add more that 100 devices as it is a hardware limitation.
You might want to look into call manager or call manager business edition.
BE will handle up to 500 users.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top