cisco client to pix connected but can't access anything

[Julian1313]

I've got a CISCO PIX 506e FIREWALL device with
Cisco PIX Firewall Version 6.3
I'm using the softeware CISCO VPN Client to connect to it.
I'm having trouble pinging/accessing anything other then the pix.
VPN Client Statistics report the following of intrest:
Bytes Received: 0,
Bytes Sent: xxxx
Packets Encrypted: 38
Packets Decrepted: 0
Packets Discaded: 0
Packets Bypassed: 0
Transport:
Transparent Tunneling: Inactive
Local LAN: Disabled
Compression: None

I can ping the VPN server(pix) and access it's https service fine once conected,

addressing is as follows:
192.168.1.1 for the pix
192.168.1.0/24 for the LAN
11.0.0.0/24 for the vpn pool
x.x.x.x for the outide interface

 

[msworld]

You may need to add access for the VPN pool, for example,

access-list inside_outbound_nat0_acl permit ip any 11.0.0.0 255.255.255.0

nat (inside) 0 access-list inside_outbound_nat0_acl

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com