Hi, I have a Cisco Aironet 802.11a/b/g wireless adapter. I am trying to capture packets using Wireshark and it only shows the traffic from my machine to destination. How do I setup my wireless card in promiscuous mode so I can capture anything on the LAN??? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco card
- Thread starter ciscotx
- Start date
Hi,
You should be able to change the adapter in Wireshark to match your LAN NIC. This would involve connecting to the LAN with your laptop and changing which card is being used to capture the packets. I don't think you can do both at the same time.
Rgds,
John
You should be able to change the adapter in Wireshark to match your LAN NIC. This would involve connecting to the LAN with your laptop and changing which card is being used to capture the packets. I don't think you can do both at the same time.
Rgds,
John
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question