Cisco callmanger and a remote site

[MMIMadness]

we have a 2 cisco callmanagers set up on our network as a redundent pair, with all the VOIP devices sitting on there own vlan and ip range.

what i need to do is to set up a remote site to use both pc's and Voip and use there own new ip range(s)

has anyone any idea on what changes / setup need to be done to get the voice side of things working, i've already got there pc's working i just need to get the phones going, or to tell the Telecoms guy what changes are needed.

Many Thanks for any help or ideas,

MMIMadness

 

[MichealC4]

What we ended up doing is setting up CM express at the remote location and telling the phone router to go to CM express first, and then our main CM servers, if necessary. I know not exactly the answer you were looking for, but if memory serves me correctly, we tried to do it the way you are suggesting, and it didn't work for us. It might work for you, I don't know.

----------------------------
"Security is like an onion" - Unknown