'CISCO Call manager User Options' 3

[kam72]

I am able to open the ccm admin page.

https://callmanager/ccmadmin/main.asp

Can any one advise how to open the ccmuser pager? When i type this url

https://callmanager/ccmuser/main.asp

its not opening.

Thanks

 

[jerake75]

Try typing only:

https://callmanager/ccmuser/

Eliminate the main.asp.

TMH

 

[telcomwork]

That did it for me!

 

[kam72]

Firstly Thanks for the response.

I have tried following links but didnt work.

https://xxx.xxx.xxx.xx/ccmuser

https://xxx.xxx.xxx.xx/ccmuser/main.asp

http://xxx.xxx.xxx.xx/ccmuser

http://xxx.xxx.xxx.xx/ccmuser/main.asp

I am able to open admin page

https://xxx.xxx.xxx.xx/ccmadmin/main.asp

Any Suggestions please?

 

[kam72]

My problem is not yet solved

 

[ADB100]

Is this is a genuine CCM install or a 'hacked' one?

I have never been able to get CallManager working properly using any of the listed hacks. I can get the CCM Admin pages working and phones registering but any of the other WEB related stuff (try the help button on the phone for example) just doesn't work.

It may be easier just to buy an old Compaq/HP DL320 or DL380 off eBay and do a 'proper' install.

Andy

 

[kam72]

Thanks for reply

Its not a hack software. I purchased the software from ebay.

I believe installation is perfect as i said i am able to open the admin page but not the ccmuser page. If something wrong with installation i would have not able to open the admin page too.

Any Expert suggestions from your end

Thanks

 

[jerake75]

You did install the CAR software, correct? If you didn't, you won't be able to access CAR.

You have to install that separately, from the CCMAdmin pages, after you install CCM...it's a plugin...

TMH

 

[kam72]

Thanks for your reply. Can you please tell me what is car software?

Thanks

 

[pndscm]

CAR is CDR Analysis and Reporting. kam72, is your CCM on an approved hardware platform or did you do the Regedit's on non-approved hardware? I'm assuming non-approved because the non-approved hardware install's usually have the issues you have posted in this post and other's. I believe there was a Post that solved the CCM User issue on non-approved hardware. You might want to search the archives. It had something to do with Security settings on the web page but I don't remember the fix.

 

[kam72]

Thanks pndscm
Yes you are right its install on non approved hardware. I have search a lot but couldnt find it.

 

[pndscm]

The fix is in this thread. thread851-959329

 

[kam72]

Thanks PNDSCM i am new to cisco but you always helped me. My problem is solved. I thank you very much.