Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco Call Manager Hunt Groups

Status
Not open for further replies.
Sep 28, 2007
29
US
Can someone point me in the right direction on creating a hunt group for on my Cisco Call Manager 4.2.1. Any documentation of advise would be helpful.
 
Pretty strait forward, All you do is create a line group to include the phones you want.

Create a hunt list to contain the line groups you want.

Create a Hunt Pilot, Select an unused DN and make sure it is an an accessible partition then select the appropriate hunt list.

Call pickup groups will not be available on the hunt pilot by default but if you need it, TAC has a service code you can enter to enable it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top