Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco ATA with IPO

Status
Not open for further replies.

Sskars

IS-IT--Management
Mar 29, 2011
30
ES
Hi all.

I am trying to install the ATA CISCO SPA122 connected with IPO. This ATA have 2 analog ports and I installed the 2 IP 3rd party licences.

I configured one SIP extension and runs fine but my problem is configuring the second extension using another diferent SIP extension.

Using Manager is not posible to create two diferent SIP extensions using the same IP device (the CISCO only accept one IP and is not possible or I don't know how assign two different IP address in each port).

Can you help me about this?. Thanks four your help.

 
The 2 ports are for when connecting it to a SIP trunk as oppose to as an extn off a PABX I believe :)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top