Cisco ASA remote VPN, routing to MPLS network on secondary interface at main site

[RoyceyBaby]

Hi,

I have a problem I don't know how to solve. We recently installed an MPLS network between Site A and Site B. I have managed to get SiteA's 5510 to route to Site B by connecting the MPLS router to e0/2 and adding in some static NAT mappings and a static route to that subnet. (e0/0 is internet, e0/1 is internal LAN)

We have around 5 existing IPSec VPN's. The one I am currently looking at is Site C, what do I need to configure to get Site C to access Site B and vice versa.

I have attached a digram that may help the discussion.

Thanks,
Royce

 

[hairlessupportmonkey]

you will have to add site C and B into the encrypted traffic on site A(?) looking at that - but are there some devices missing off the diagram?

ACSS - SME
General Geek