Cisco ASA - enable RSA Key from ASDM [HELP!]

[locobox]

Here's the deal... I'm offsite, but have remote ASDM connection to my cisco ASA 5505 through my linux firewall (port-forwarding through). I would like to connect via ssh to my ASA5505, but i get this is what I get when trying to ssh (verbose mode):

root@Atreus:~# ssh -v -l xxusernamexx 10.2.2.61
OpenSSH_4.3p2 Debian-9, OpenSSL 0.9.8c 05 Sep 2006
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 10.2.2.61 [10.2.2.61] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1
ssh_exchange_identification: read: Connection reset by peer


I understand I can troubleshoot pretty easily while consoled into my cisco, but can I troubleshoot this from the ASDM web console? I don't give up that easily, but have been trying for a couple of hours without any results.

Please advice,

Locobox

 

[brianinms]

I am not sure where you are getting stuck, but this document should fix you up.

http://www.cisco.com/en/US/products...onfiguration_example09186a008069bf1b.shtml#a2