Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco AS5300 Dial peers

Status
Not open for further replies.

DaveGreeko

IS-IT--Management
Oct 20, 2006
11
0
0
US
I'm trying to exchange calls between 2 SIP proxies and and a cisco gateway (AS5300)
Let me first show you what what I'm trying to accomplish before I explain my problem

SIP_Proxy_1<--->AS5300<-->SIP_Proxy_2
------------------|------------------
------------------|------------------
---------------|-PSTN-|--------------

Calls are sent from proxy 1 to proxy 2 with prefix 2222
Calls are sent from proxy 2 to proxy 1 with prefix 1111
Proxy 1 and proxy 2 calls out to PSTN through the gateway with prefix 9999
proxy 1 and proxy 2 do NOT dial fixed length digits after the prefix, it always varies.

here are my dial peers settings:


dial-peer voice 1111 voip
destination-pattern 1111T
voice-class codec 10
session protocol sipv2
session target ipv4:192.168.1.1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 2222 voip
destination-pattern 2222T
voice-class codec 10
session protocol sipv2
session target ipv4:192.168.1.2
dtmf-relay rtp-nte
no vad
!

dial-peer voice 100 pots
destination-pattern 9999T
no digit-strip
direct-inward-dial
port 0:D
!

I'm sure I have Dial-peers not configured right but I cannot figure it out.
when SIP proxy 1 calls exten 2222175 on proxy 2
the AS5300 returns (SIP/2.0 404 Not Found). Any guiding how I can accomplish this task is really appreciated, I'm no cisco guy but I'm under so much pressure
Dave,







 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top