Cisco 827 - memory required for different features ? 1

[rhino99]

Hello,

Have an 827, and looking to move to IP/FW or 3DES/IPSEC Feature set. Not sure if I have enough memory for either. I see reference to processor memory, as well as System/Web Flash.

Either way, what image would I need to request. Had seen reference to 'T' versions before, if IPSEC was going to be involved.

Here's my info - thanks in advance.

router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-Y6-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)
TAC Support:

http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 21-Jun-02 15:10 by ccai
Image text-base: 0x80013170, data-base: 0x806A1944

ROM: System Bootstrap, Version 12.1(1r)XB1, RELEASE SOFTWARE (fc1)

router uptime is 20 hours, 14 minutes
System returned to ROM by power-on
System restarted at 18:38:13 UTC Wed Mar 23 2005
System image file is "flash:c820-y6-mz.122-8.T5.bin"

CISCO C827 (MPC855T) processor (revision 0x801) with 31744K/1024K bytes of memor
y.
Processor board ID JAD07120JZX (3132158038), with hardware revision 0000
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

 

[JOAMON]

Hello...

827
Software Feature Sets: IP/FW PLUS IPSEC 3DES
Release: 12.3.11T3 ( ED - Early Deployment )

c820-k9osy6-mz.123-11.T3.bin 27-JAN-2005

8 (MB) Min. Flash
32 (MB) Date Released

This is the latest and your router has the memory to support it.