baldingfast
Technical User
I have a 5 machine P2P network and have just set up VPN access via an 803.
The 803 has benn checked by Cisco TAC and there is nothing wrong there, however, I can connect to the 803 without a problem but I just cant see didly on the network.
the network is as follows:-
2 dreded Win ME machines
2 Win2k machine
1 XP Machine
There are two client machines one is XP and the other 2k
Netbios over tcp is enabled and I have correctly entered the two PC's I want to connect to in the lmhosts file.
But to no avail.
There is no server on the network so no wins or dns to speak of.
I am using cisco clent software 3.6.4 and the MTU is default.
Even with the firewall completly disabled on the 2k I can't see or even ping the internal network. This is using a dsl connection.
The XP machine has the same issue except it uses isdn for internet connectivity.
Any help would be appreciated.
The 803 has benn checked by Cisco TAC and there is nothing wrong there, however, I can connect to the 803 without a problem but I just cant see didly on the network.
the network is as follows:-
2 dreded Win ME machines
2 Win2k machine
1 XP Machine
There are two client machines one is XP and the other 2k
Netbios over tcp is enabled and I have correctly entered the two PC's I want to connect to in the lmhosts file.
But to no avail.
There is no server on the network so no wins or dns to speak of.
I am using cisco clent software 3.6.4 and the MTU is default.
Even with the firewall completly disabled on the 2k I can't see or even ping the internal network. This is using a dsl connection.
The XP machine has the same issue except it uses isdn for internet connectivity.
Any help would be appreciated.