Cisco 7961 SIP Source Port

[robfreemax]

Im working on changing out a Cisco call manager and the custoenr wants to keep all the old 7961G phones. I have loaded some with Sip firmware and set the SEP config files. I notice that the Sip source port from the phone is not 5060 and that the new PBX will respond on the original source port received from the Cisco 7961. when in fact the phone expects the response on 5060. Is ther any way to specify the source port on the 7961G? its running 8.5.3 at the moment

 

[gnrslash4life]

Check the Phone Security Profile that the phones are using. You can specify the port there. Also, if you are using SIP Trunks in CM. Check there as well.

Certifications:
A+
Network+
CCENT
CCNA Voice
TVOICE
CAPPS