Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco 7960 MGCP Configuration

Status
Not open for further replies.

telnettech

Vendor
May 5, 2005
207
US
Here is the scenario: I have a bunch of Cisco 7960G phones with another PBX system using MGCP for the calls. These phones are pointed to an Edgemarc 5300 media gateway currently. I want to include another EdgeMarc gateway in the network and split up the phones to alleviate a single point of failure for our call center phones and was wondering if I am able to do the following:

Is there a way to add a secondary mgcp gateway to the phone configuration so that if the primary gateway goes off line the phone will register and connect to a second gateway? If so, how is this accomplished? Thru the MGC<MACAddress>.cnf file?

Thanks in advance for any answers
Brian

To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!
 
So is there a call manager in the picture or call manager express?
Phones do not use MGCP to register to a gateway.
Either SCCP or SIP are the two options.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top