Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco 7500 series routers

Status
Not open for further replies.
jrichv

jrichv

Technical User
Mar 3, 2003
7
0
0
US
Does anyone have a 7500 series router with dual RSP cards? If so, what are you running for redundancy/failover between the two cards?

Thanks,
jrichv
 
Sort by date Sort by votes
Don't quite understand what you are asking here ,could you clarify ?
 
Upvote 0 Downvote
Let me rephrase and clarify: If you have a 7500 router, how many Route Switch Processor cards do you have installed - one or two? If you have two RSP's installed, are they in active/standby mode, with one running as the active RSP, and the other one ready to take over in the event of a failure on the first one?

thanks,
jrichv
 
Upvote 0 Downvote
We mostly have one in each router though we do have a couple with dual rsp's . The primary slot6 I believe will run unless there is a problem at which time it would switch over to the secondary slot 7. If you make a config change on the primary it will automatically get updated on the 2nd rsp .
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

pbxcomm
  • Locked
  • Question
CISCO VG450
Replies
1
Views
120
bdk76
bdk76
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
106
madwok
madwok
Jared R
  • Locked
  • Question
Cisco UC320W Paging Help
Replies
0
Views
123
Jared R
Jared R
Hayden09
  • Locked
  • Question
Cisco Sg-300 Flapping?
Replies
0
Views
108
Hayden09
Hayden09
JMarine0811
  • Locked
  • Question
CISCO VG450 Factory reset
Replies
1
Views
140
whykap
whykap

Part and Inventory Search

Sponsor

Back
Top