I'm not sure what place to start. Cisco or the IP office forum. Standard setup T1 inbound dial.
Oh and using DS0 with ESF, B8ZS, clock internal on cisco. With wink and Direct inbound dial.
Cisco is setup with 1 t1 card and 1 fxs 4 port card.
(it has more cards but I'm not messing with that yet)
misc. analog phones fxs - cisco - t1 - ip office - misc. phones.
Calling from the ip office to the fxs phone is perfect.
Calling from fxs port to fxs port is perfect.
Dial from fxs port to ip office. 1. dial tone 2 dial number 3. Heard DTMF Tones 4. No Sound. 5 dial tone? 6. ringing (call goes through.)
During this time. The Avaya says Seized. From what I can tell Seized is when you get the dial tone.
If you need any configuration info. I'll post it tomorrow after work.
Thank You, Josh
Oh and using DS0 with ESF, B8ZS, clock internal on cisco. With wink and Direct inbound dial.
Cisco is setup with 1 t1 card and 1 fxs 4 port card.
(it has more cards but I'm not messing with that yet)
misc. analog phones fxs - cisco - t1 - ip office - misc. phones.
Calling from the ip office to the fxs phone is perfect.
Calling from fxs port to fxs port is perfect.
Dial from fxs port to ip office. 1. dial tone 2 dial number 3. Heard DTMF Tones 4. No Sound. 5 dial tone? 6. ringing (call goes through.)
During this time. The Avaya says Seized. From what I can tell Seized is when you get the dial tone.
If you need any configuration info. I'll post it tomorrow after work.
Thank You, Josh
