Just purchased a used Cisco 3725 router and want to install additional ethernet ports. I have 2 NM-1FETX cards and 1 NM-2FE2W from a 3640. From what I can tell the 1FETX is not supported on the 3725 but the 2fe2w should be. IOS is 12.4(3). Should this IOS support this card?
From show version:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(3), RE
LEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 02:27 by hqluong
ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)
Router uptime is 46 minutes
System returned to ROM by power-on
System image file is "flash:c3725-advipservicesk9-mz.124-3.bin"
From show version:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(3), RE
LEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 02:27 by hqluong
ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)
Router uptime is 46 minutes
System returned to ROM by power-on
System image file is "flash:c3725-advipservicesk9-mz.124-3.bin"