DanielBowen
Technical User
Hi there,
I have a Cisco 3640 router connected to 2 ISDN30 lines that we are trying to use as a dialup router. I have tried configuring the router but no no avail. When I dial the number from a land line I simply get "number is temporarily out of order", and the modems show a failed call.
I have attached the config below, could anybody have a look and give me some poiunters?
Thanks very much in advance,
Daniel,
ip address-pool local
isdn switch-type primary-net5
!
controller E1 0/0
pri-group timeslots 1-31
!
controller E1 0/1
pri-group timeslots 1-31
!
!
!
interface Loopback0
ip address 192.168.1.0 255.255.255.255
!
interface FastEthernet0/0
ip address 161.76.27.102 255.255.255.252
duplex auto
speed auto
!
interface Serial0/0:15
no ip address
encapsulation ppp
ip mroute-cache
isdn switch-type primary-net5
ppp authentication chap
!
interface Serial0/1:15
no ip address
encapsulation ppp
ip mroute-cache
isdn switch-type primary-net5
ppp authentication chap
!
interface Group-Async0
ip unnumbered Loopback0
encapsulation ppp
async mode interactive
peer default ip address pool dialin
ppp authentication chap dialins
group-range 33 62
!
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
async mode interactive
peer default ip address pool dialin
ppp authentication chap dialins
group-range 65 94
interface Dialer0
ip address 12.2.2.1 255.255.255.252
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer idle-timeout 180
dialer max-call 30
dialer-group 1
peer default ip address pool dialin
no cdp enable
ppp authentication chap
ppp multilink
!
router eigrp 1
redistribute connected
network x.x.x.x
no auto-summary
eigrp log-neighbor-changes
!
ip local pool dialin x.x.x.x x.x.x.x
ip classless
no ip http server
I have a Cisco 3640 router connected to 2 ISDN30 lines that we are trying to use as a dialup router. I have tried configuring the router but no no avail. When I dial the number from a land line I simply get "number is temporarily out of order", and the modems show a failed call.
I have attached the config below, could anybody have a look and give me some poiunters?
Thanks very much in advance,
Daniel,
ip address-pool local
isdn switch-type primary-net5
!
controller E1 0/0
pri-group timeslots 1-31
!
controller E1 0/1
pri-group timeslots 1-31
!
!
!
interface Loopback0
ip address 192.168.1.0 255.255.255.255
!
interface FastEthernet0/0
ip address 161.76.27.102 255.255.255.252
duplex auto
speed auto
!
interface Serial0/0:15
no ip address
encapsulation ppp
ip mroute-cache
isdn switch-type primary-net5
ppp authentication chap
!
interface Serial0/1:15
no ip address
encapsulation ppp
ip mroute-cache
isdn switch-type primary-net5
ppp authentication chap
!
interface Group-Async0
ip unnumbered Loopback0
encapsulation ppp
async mode interactive
peer default ip address pool dialin
ppp authentication chap dialins
group-range 33 62
!
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
async mode interactive
peer default ip address pool dialin
ppp authentication chap dialins
group-range 65 94
interface Dialer0
ip address 12.2.2.1 255.255.255.252
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer idle-timeout 180
dialer max-call 30
dialer-group 1
peer default ip address pool dialin
no cdp enable
ppp authentication chap
ppp multilink
!
router eigrp 1
redistribute connected
network x.x.x.x
no auto-summary
eigrp log-neighbor-changes
!
ip local pool dialin x.x.x.x x.x.x.x
ip classless
no ip http server