Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco 3550 POE Switch - cant use terminal

Status
Not open for further replies.

jolly1967

Technical User
Jun 3, 2007
1
US
One of my client had problem with 3550xl switch after power outage.. check switch and couldnt gain access using hyperterminal or putty..Press the mode button while power...got "switch:"
1. Accidentally format flash

2. Dont have IOS but copy IOS from another 3550xl switch# copy flash tftp...use pumpkin

3. On switch that was format
switch : copy xmodem: flash:(ios)
4. Complete the upload

5. switch : boot flash

I watch it boot....but reach ...Initial Configuration Y/N....

THEN THE PROBLEM...I CANT USE THE TERMINAL ANYMORE TO TALK TO THE SWITCH

I can see message ....but i cant type anything...I use putty...hyperterminal...procomm plus

Please help
 
Sounds like it could be a speed problem on the console.

Reboot the 3550 to the switch> prompt, type confreg(?), and step through the options till you can change the baud speed.

Hope that helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top