How do you assign ip addresses to individual ports on a Cisco 3550-12G? The IOS is Version 12.1(13) EA1aVersion 12.1(13) EA1a. I have attempted the following:
Core_Switch(config)#int gi0/1
Core_Switch(config-if)#ip address 199.100.10.1 255.255.255.0
And get an error:
% IP addresses may not be configured on L2 links.
I have enabled ip routing at the global and am stumped.
Core_Switch(config)#int gi0/1
Core_Switch(config-if)#ip address 199.100.10.1 255.255.255.0
And get an error:
% IP addresses may not be configured on L2 links.
I have enabled ip routing at the global and am stumped.