eatingrice
MIS
Hi,
I have a Cisco 2621 with interface e0/0 on the Internet with NAT and e0/1 trunking with two VLANs (e0/1.1 and e0/1.2). I could access the Internet from each of the VLAN on a Cisco 2950 with trunking. My problem is that I could not get to any systems on VLAN2 from VLAN1 and vice versa. The router could get to both VLAN though. Here is my router config: Thanks in advance.
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ROUTER
!
boot-start-marker
boot-end-marker
!
no ip domain lookup
ip name-server 64.81.122.2
ip name-server 216.231.145.6
!
ip audit po max-events 100
interface FastEthernet0/0
ip address 208.168.123.50 255.255.255.0
ip nat outside
duplex auto
speed auto
!
interface Serial0/0
no ip address
shutdown
!
interface FastEthernet0/1
no ip address
speed 100
full-duplex
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.11.10.1 255.255.255.0
no ip redirects
ip nat inside
no snmp trap link-status
!
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 10.11.9.1 255.255.255.0
no ip redirects
ip nat inside
no snmp trap link-status
!
interface Serial0/1
no ip address
shutdown
!
ip nat inside source list 110 interface FastEthernet0/0 overload
no ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 208.168.123.1
!
!
access-list 110 permit ip 10.11.10.0 0.0.0.255 any
access-list 110 permit ip 10.11.9.0 0.0.0.255 any
!
line con 0
line aux 0
line vty 0 4
login
transport input none
!
!
end
I have a Cisco 2621 with interface e0/0 on the Internet with NAT and e0/1 trunking with two VLANs (e0/1.1 and e0/1.2). I could access the Internet from each of the VLAN on a Cisco 2950 with trunking. My problem is that I could not get to any systems on VLAN2 from VLAN1 and vice versa. The router could get to both VLAN though. Here is my router config: Thanks in advance.
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ROUTER
!
boot-start-marker
boot-end-marker
!
no ip domain lookup
ip name-server 64.81.122.2
ip name-server 216.231.145.6
!
ip audit po max-events 100
interface FastEthernet0/0
ip address 208.168.123.50 255.255.255.0
ip nat outside
duplex auto
speed auto
!
interface Serial0/0
no ip address
shutdown
!
interface FastEthernet0/1
no ip address
speed 100
full-duplex
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.11.10.1 255.255.255.0
no ip redirects
ip nat inside
no snmp trap link-status
!
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 10.11.9.1 255.255.255.0
no ip redirects
ip nat inside
no snmp trap link-status
!
interface Serial0/1
no ip address
shutdown
!
ip nat inside source list 110 interface FastEthernet0/0 overload
no ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 208.168.123.1
!
!
access-list 110 permit ip 10.11.10.0 0.0.0.255 any
access-list 110 permit ip 10.11.9.0 0.0.0.255 any
!
line con 0
line aux 0
line vty 0 4
login
transport input none
!
!
end