Hi
I'm new to this, please be gentle
I have a Cisco 2620 router with an 8 channel ISDN card.
Each port on the card has its own phone number.
When computer 1 connects through port 1 or 2 when no other ports are being used, connects in approx 5 sec all OK.
If computer 2 connects to port 1 or 2 when no other ports are being used, connects in approx 5 sec all OK.
When either computer 1 or computer 2 connect while another connection is active they can authenticate although it takes approx 30 sec but can not see any of the network, a continuous PING will time out 75% of the time.
As soon as the original connection is dropped the slow 2nd connection can PING without any problems.
Also the first working connection picks up the 2nd line (from 64k to 128k) almost instantly. The 2nd connection after taking the initial 30 sec to connect then takes another 15sec to pull up to 128k.
I'm new to this, please be gentle
I have a Cisco 2620 router with an 8 channel ISDN card.Each port on the card has its own phone number.
When computer 1 connects through port 1 or 2 when no other ports are being used, connects in approx 5 sec all OK.
If computer 2 connects to port 1 or 2 when no other ports are being used, connects in approx 5 sec all OK.
When either computer 1 or computer 2 connect while another connection is active they can authenticate although it takes approx 30 sec but can not see any of the network, a continuous PING will time out 75% of the time.
As soon as the original connection is dropped the slow 2nd connection can PING without any problems.
Also the first working connection picks up the 2nd line (from 64k to 128k) almost instantly. The 2nd connection after taking the initial 30 sec to connect then takes another 15sec to pull up to 128k.