Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 2611XM VPN router and Sonicwall Pro 2040 Firewall
- Thread starter stevebg68
- Start date
ciscofreak1241
MIS
So actually, you are after what ports need to be allowed on the Sonicwall Firewall for IPSec VPN access?
Is your NAT configured dynamically or statically? How is your VPN configured on your c2611 router (pre-share, AH or ESP, ISAKMP or manual, etc)?
I seen two problems here in the past, 1)NATing and 2)most Firewalls on the Perimeter always terminate IPSec VPN to itself, but there is an option to allow IPSec Pass-Thru. I know the PIX has that option and I reference back for the Sonicwall if that is true in this case.
cf
Is your NAT configured dynamically or statically? How is your VPN configured on your c2611 router (pre-share, AH or ESP, ISAKMP or manual, etc)?
I seen two problems here in the past, 1)NATing and 2)most Firewalls on the Perimeter always terminate IPSec VPN to itself, but there is an option to allow IPSec Pass-Thru. I know the PIX has that option and I reference back for the Sonicwall if that is true in this case.
cf
- Status