cisco 2600 configuration

[calalo]

I have a cisco 2600 router with one fastethernet port and one serial port and a T1. If somebody can help me with a basic configuration to get it work? Thanks.

internal network:
10.2.1.0
255.255.255.0

fastethernet port ip: 10.2.1.254

serial port ip: 200.12.235.34

need help to configure ips, routing, NAT, etc. basic to get the router work.
Thank you very much.

 

[MTandSAV]

here is a basic conf of a 2600: you'll need to adjust the ip addresses and interface..etc.. link to cisco site..

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/826/swg/routconf.htm

ip name-server xx
ip name-server xx
ip dhcp excluded-address 192.168.0.1 192.168.0.10
!
ip dhcp pool homenet
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server xx xx
!
no ip dhcp-client network-discovery

!
!
!
interface Ethernet0/0
200.12.235.34 SM
ip nat outside
duplex
no cdp enable
!
interface Serial0/0
no ip address
shutdown
!
interface Ethernet0/1
ip address 192.168.0.1 255.255.255.0
ip nat inside
full-duplex
no cdp enable
!
!
ip nat translation timeout 30
ip nat inside source list 1 interface Ethernet0/0 overload
ip classless

CCNA, CCNP..partly

 

[calalo]

I want you to be more specific for my network, I have a windows 2000 domain with dhcp server network connected to a 3548 cisco switch this switch is connected to the router to the ethernet port ip 10.2.1.254 (default gateway) and the s0 port is connected to a T1 line and I need it connected to the internet ASAP, thank you very much for your help.