CISCO 2513 routers

[mireles10]

I want to connect these two routers for a CCNA test.
The routers have 1-Ethernet, 2-serial, I token ring

comp1<-->ether_swith<-->router1<--->router2<-->ether_switch--comp2


is the cable between routers a crossover?
since each router has i ethernet, can I use the token/serial to connect the two routers?

any help will be greatly appreciated

 

[Minue]

Hello
You need a DB60-V35 DTE/DCE crossover cable for the serial interfaces.You can find them on Ebay.
Regards

 

[burtsbees]

You can actually "bundle" two serial connections with a virtual-template configuration, increasing the throughput bandwidth from 1.5 MBps to 3 MBps.

Burt