spidermanfan
MIS
Can a cisco 1841 be hooked up to a T1, or do I need a T1 card for the 1841?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 1841
- Thread starter spidermanfan
- Start date
- Status
That depends on whether that T1 terminates onto an external CSU/DSU or not. If the line comes into a jack or a bisquit box, then you'll need to run a cable to your router and purchase an internal CSU/DSU card for the router (WIC-1DSU-T1-V2 for the 1841), or buy an external CSU/DSU, and then run serial to the router and (still have to) buy a serial WIC (like WIC-1T). Internal CSU/DSU are preffered, since you can get more info about the status of the line through the router's command line interface.
- Status
Similar threads